The CA-IF1044x-Q1 high-speed control area network (CAN) transceivers meet the ISO 11898-2 physical layer standards. This family of devices is designed for using in automotive CAN FD networks up to 5 Mbps data rate and features ±58V extended fault protection on the CAN bus for equipment where overvoltage protection is required. The transceivers include a dominant timeout detection to prevent bus lockup caused by hung-up microcontroller, and the outputs CANH and CANL are short-circuit current-limited and protected against excessive power dissipation by thermal shutdown circuitry that places the driver outputs in a high-impedance state. Also, the CA-IF1044Vx-Q1 provides low level translation to simplify the interface with low voltage CAN controllers.
The CA-IF1044x-Q1 devices are in a standard 8-pin SOIC package and small-size 8-pin DFN package. This family of devices operates over the -40°C to +125°C temperature range.
名称 | 参数 |
---|---|
Meets the ISO 11898-2 physical layer standards | |
Support classic CAN and 5 Mbps CAN FD (flexible data rate) | |
Integrated protection increases robustness | ±58V fault-tolerant CANH and CANL ±30V extended common-mode input range (CMR) Transmitter dominant timeout prevents lockup Undervoltage protection on VCC and VIO Thermal shutdown |
Ideal passive behavior when unpowered | Bus and logic terminals are high impedance (no load) Power up/down with glitch free operation on bus and RXD output |
Low loop delay | 160ns (typical) |
Two operation modes | Normal high-speed mode Standby mode for low current consumption 3.3V to 5.5V logic-supply range |
-40°C to +125°C operating temperature | |
AEQ-100 Grade 1 qualified | |
Package | SOIC8(S)、DFN8 |
◎ Automotive gateway
◎ Advanced driver assistance system (ADAS)
◎ Body electronics
◎ Infotainment
Part Number | Package | Package Size (NOM) |
---|---|---|
CA-IF1044VD-Q1 | DFN8 | 3.0mm x 3.0mm |
CA-IF1044D-Q1 | DFN8 | 3.0mm x 3.0mm |
CA-IF1044VS-Q1 | SOIC8(S) | 4.9mm x 3.9mm |
CA-IF1044S-Q1 | SOIC8(S) | 4.9mm x 3.9mm |
The CA-IF1044x-Q1 high-speed control area network (CAN) transceivers meet the ISO 11898-2 physical layer standards. This family of devices is designed for using in automotive CAN FD networks up to 5 Mbps data rate and features ±58V extended fault protection on the CAN bus for equipment where overvoltage protection is required. The transceivers include a dominant timeout detection to prevent bus lockup caused by hung-up microcontroller, and the outputs CANH and CANL are short-circuit current-limited and protected against excessive power dissipation by thermal shutdown circuitry that places the driver outputs in a high-impedance state. Also, the CA-IF1044Vx-Q1 provides low level translation to simplify the interface with low voltage CAN controllers.
The CA-IF1044x-Q1 devices are in a standard 8-pin SOIC package and small-size 8-pin DFN package. This family of devices operates over the -40°C to +125°C temperature range.
名称 | 参数 |
---|---|
Meets the ISO 11898-2 physical layer standards | |
Support classic CAN and 5 Mbps CAN FD (flexible data rate) | |
Integrated protection increases robustness | ±58V fault-tolerant CANH and CANL ±30V extended common-mode input range (CMR) Transmitter dominant timeout prevents lockup Undervoltage protection on VCC and VIO Thermal shutdown |
Ideal passive behavior when unpowered | Bus and logic terminals are high impedance (no load) Power up/down with glitch free operation on bus and RXD output |
Low loop delay | 160ns (typical) |
Two operation modes | Normal high-speed mode Standby mode for low current consumption 3.3V to 5.5V logic-supply range |
-40°C to +125°C operating temperature | |
AEQ-100 Grade 1 qualified | |
Package | SOIC8(S)、DFN8 |
◎ Automotive gateway
◎ Advanced driver assistance system (ADAS)
◎ Body electronics
◎ Infotainment
Part Number | Package | Package Size (NOM) |
---|---|---|
CA-IF1044VD-Q1 | DFN8 | 3.0mm x 3.0mm |
CA-IF1044D-Q1 | DFN8 | 3.0mm x 3.0mm |
CA-IF1044VS-Q1 | SOIC8(S) | 4.9mm x 3.9mm |
CA-IF1044S-Q1 | SOIC8(S) | 4.9mm x 3.9mm |