CA-IS3082WW
CA-IS3082WW
Active
Isolated RS-485/422 Transceivers
The CA-IS3082WW devices are reinforced isolated RS-485 transceivers which have excellent performance to meet the needs of the industrial applications. All devices of this family have the logic input and output buffers separated by a silicon oxide (SiO2) insulation barrier that provides up to 7.5- kVRMS (60s) of galvanic isolation of and typical ±150kV/μs CMTI. Isolation barrier improves communication quality by breaking ground loops and reducing noise where there are large differences in ground potential between ports.
The CA-IS3082WW devices support multi-node data communication, and maximum data rate is up to 500kbps, allowing up to 256 transceivers (loads) on a common bus. The CA-IS3082WW devices are half-duplex transceivers, which could control the driver and receiver enable pins to avoid bus conflicts.
The CA-IS3082WW devices are available in 16-pin ultrawide-body SOIC package (creepage and clearance ≥ 15mm), and specified over extended industrial temperature range of –40°C to +125°C.
-
Features
Meets or Exceeds the Requirements of the TIA/EIA 485A Standard
500kbps Data Rate
1/8 Unit Load (Up to 256 Bus Nodes)
Logic-Side Supply Voltage
2.375V to 5.5V
Bus-Side Supply Voltage
3V to 5.5V
Common Mode Range on Bus Pins
–7V to +12V
High CMTI
±150kV/μs (typ)
Bus Pins (A/B) ESD Protection
±20kV (HBM)
Driver with Current Limiter and Thermal Shutdown Protection
Open, Short and Idle Bus Failsafe Protection
Extended Industrial Temperature Range
–40°C to 125°C
16-Pin Ultra-Wide-Body SOIC Package, creepage and clearance ≥ 15mm
> 40-Year Lifetime at Rated Isolated Voltage
-
Applications
-
Solar Inverter
-
High Voltage Energy Storage Systems
-
Railway Transportation
-
Wind Power System
-
Charging Pile
-
-
Device Information
Part # Package Package size (NOM) CA-IS3082WW SOIC16-WWB (WW) 10.30mm×14.00mm -
Simplified Functional Diagram
-
Technical Documentation
Category
Title
Last Updated
-
Title: Datasheet
Last Updated: Nov 20,2024
-