CA-IF1042VS-Q1
Active
Automotive CAN Transceiver
The CA-IF1042x devices are control area network (CAN) transceivers with integrated protection for industrial and automotive applications. These devices are designed for using in CAN FD networks up to 5 Mbps and feature ±70V extended fault protection on the CAN bus for equipment where overvoltage protection is required. This family of CAN transceivers also incorporate an input common-mode range(CMR) of ±30V, exceeding the ISO 11898 specification of -2V to +7V, well suited for applications where ground planes from different systems are shifting relative to each other. The CA-IF1042x series devices include a dominant timeout to prevent bus lockup caused by controller error or by a fault on the TXD input. When the TXD remains in the dominant state (low) for longer than tDOM, the driver is switched to the recessive state, releasing the bus and allowing other nodes to communicate. The transceivers feature a STB pin for two modes of operation: normal high-speed mode and standby mode for low current consumption. Also, the CA-IF1042VS Q1 family of devices provides low level translation to simplify the interface with low voltage CAN controllers. The CA-IF1042x family of devices is available in a standard 8-pin narrow-body SOIC package, operates over the -55°C to +150°C junction temperature range.
-
Features
Meets the ISO 11898-2:2016 and ISO 11898-5:2007 physical layer standards
'Turbo' CAN
Support classic CAN and 5 Mbps CAN FD (flexible data rate)
Short and symmetrical propagation delay time and fast loop time for enhanced timing margin
Higher data rate in loaded CAN networksIdeal passive behavior when unpowered
Bus and logic terminals are high impedance (no load)
Power up/down with glitch free operation on bus and RXD outputIntegrated protection increases robustness
±70V fault-tolerant CANH and CANL
±30V extended common-mode input range (CMR)
Undervoltage protection on VCC and VIO supply terminals
Transmitter dominant timeout prevents lockup, data rates down to 4 kbps
Thermal shutdownTypical loop delay
160ns
3.0V to 5.5V Logic-Supply (VIO) Range (CA-IF1042VS-Q1 only)
–55°C to 150°C Junction Temperatures Range
Available in SOIC8 Packages
-
Applications
-
Body electronics and lighting
-
Automotive gateway
-
Advanced driver assistance systems (ADAS)
-
Infotainment and cluster
-
-
Device Information
Part number Package Package size(NOM) CA-IF1042S-Q1 SOIC8 4.9mm x 3.9mm CA-IF1042VS-Q1 -
Simplified Functional Diagram
-
Technical Documentation
Category
Title
Last Updated
-
Title: Datasheet
Last Updated: Nov 21,2023
-
-
Certification Standards
Category
Title
Certification Number
Date
-
Title: C&S
Certification Number: P22_0116-1_005_IOPT_IF1042VS_report00
Date: Mar 10,2022
-
Title: Reliability Test
Certification Number: CA-IF1042XX-Q1_V1.2
Date: Oct 21,2022
-