CN
b2bannerpc.jpg b1bannerph-804.jpg

CA-IF10283S-Q1

CA-IF10283S-Q1

f_ico03.svg

Preview

LIN Transceivers with LDO

The CA-IF1028 family of device is Local Interconnect Network (LIN) transceiver with integrated wake-up and protection features for automotive applications. LIN is lowspeed universal asynchronous receiver transmitter (UART) communication protocol used to support in-vehicle networks. The CA-IF1028 transceiver controls the LIN bus state via the TXD input and reports the bus state on output RXD between the protocol controller and physical LIN networks. These device features slew-rate control and wave-shaping to reach a very low level of electromagnetic emission (EME) within a broad frequency range.

CA-IF1028 devices are designed to support 12V automotive applications with 5.5V to 28V wide VBAT input voltage operating range and have up to ±42V fault protection on LIN bus, with integrated ESD protection, these devices help to reduce external components in the design.

Also, these devices feature low-power Sleep mode, as well as wake-up capability over LIN bus, or via the EN pin. In the event of a ground shift or supply voltage disconnection, the devices can prevent back-feed current through LIN to VBAT.

CA-IF1028 integrates a low dropout regulator (LDO), providing 5V or 3.3V voltage output, with power supply currents up to 100mA (SOIC8) and 125 mA (DFN8) to power other devices.

CA-IF10283S-Q1.png

  • Features

    AEC-Q100 Qualified for Automotive Application(Certification in progress)

    Meets LIN2.0、LIN2.1、LIN2.2、LIN2.2A and ISO 17987-4:2016(12V) Physical-layer (EPL) Standards

    Compliant to SAE J2602-1 and SAE J2602-2 LIN Physical-layer Specification

    Designed to Support 12V Applications with Wide Operating Supply Range

    5.5V to 28V supply range (VBAT)

    Support up to 20kbps LIN Transmission Data Rate

    Operating Mode

    Normal operation
    Low-power Standby （typ.25μA）
    Low-power Sleep（typ.16μA）
    Power-off

    Wake-up from Low-power Mode

    Remote wake-up via LIN bus
    wake-up via EN pins

    Integrated 30kΩ LIN pull-up Resistor

    Power-up/down Glitch-free Operation on LIN bus and RXD output

    Integrated Protection Increases Robustness

    ±42V fault-tolerant LIN bus
    42V load dump protection
    Enhanced ESD protection
    Undervoltage protection on VBAT
    Transmitter dominant timeout prevents lockup
    VCC output voltage short and LIN bus short circuit protection functions
    Thermal shutdown
    System level fail-safe protection for the unpowered node or ground disconnection

    Voltage regulator offering 5 V or 3.3 V

    100 mA capability(SOIC8) and 125 mA capability(DFN8)

    –40°C to 150°C Junction Temperatures Range

    Available in SOIC8 and DFN8 Packages

  • Applications

    • Body electronics

    • Automotive gateway

    • Infotainment and cluster

    • Hybrid electric vehicles and powertrain systems

  • Device Information

    Part numberPackagePackage size(NOM)
    CA‐IF10285S‐Q1SOIC84.9mm×3.9mm
    CA‐IF10285D‐Q1DFN‐83mm x 3mm
    CA‐IF10283S‐Q1SOIC84.9mm×3.9mm
    CA‐IF10283D‐Q1DFN‐83mm x 3mm

  • Simplified Functional Diagram

    ca_if1028.jpg