CN
download-57.jpg b1bannerph-882.jpg

CA-IS3643HW

CA-IS3643HW

f_ico02.svg

Active

Quad Channel Digital Isolators with Iso-power

The CA-IS36xx family integrated signal and power isolation devices simplify system design and reduce board area. These devices are high-performance, dual-channel and four-channel, unidirectional reinforced digital isolators with up to 5kVRMS isolation rating and ultra-fast data rate. The integrated isolated DC-DC converter provides up to 650mW of isolated power and different output voltage configurations. These devices offer high electromagnetic immunity and low emissions while isolating different ground domains and block high-voltage/high-current transients from sensitive or human interface circuitry. Each isolation channel has a logic input and output buffer separated by capacitive silicon dioxide (SiO2) insulation barrier, the integrated Schmitt trigger on each input provide excellent noise immunity.

The CA-IS362x devices are dual-channel digital isolators and the CA-IS3640/CA-IS3641/CA-IS3642/CA-IS3643/CA- IS3644 devices are quad-channel digital isolators. They offer all possible unidirectional channel configurations to accommodate any 2-channel or 4-channel digital I/Os design, including SPI, RS-485, and digital I/O applications, see Name Convention for more detail, also Table 5-1 shows the detail configurations of digital signal transmission direction for each part. The CA-IS36xx family also features different default outputs. When the input is either not powered or is open-circuit, the default output is low for devices with suffix L and high for devices with suffix H, see the Ordering Information for suffixes associated with each option. The individual logic supply input of CA-IS36xxLVW and CA-IS36xxHVW devices allows fully compatible +3.3V and +5.0V logic on side-A digital lines.

The CA-IS36xx family devices are specified over the -40°C to +125°C operating temperature range and are available in 16-pin SOIC wide body package.

CA-IS3643HW.jpg

  • Features

    Integrated High-efficiency DC-DC Converter withon-chip Transformer

    Regulated output options: 3.3 V or 5.0 V
    Up to 650mW output power
    Soft-start to limit inrush current and overshoot
    Overload and short-circuit protection
    Thermal shutdown
    Low emissions

    Robust Galvanic Isolation of Digital Signals

    High lifetime: > 40 years
    Withstands 5kVRMS for 60s
    ±150 kV/μs typical CMTI
    Schmitt trigger inputs

    Interfaces Directly with Most Micros and FPGAs

    Data rate: DC to 100Mbps
    3V to 5.5V single supply operation, also provide individual logic supply input (CA-IS36xxLVW and CA-IS36xxHVW devices only)
    Default output High (CA-IS364xH) and Low (CA-IS362xL, CA-IS364xL) Options

    Best in class propagation delay and skew

    10ns typical propagation delay
    2ns propagation delay skew (chip -to-chip)
    1ns pulse width distortion

    No Start-Up Initialization Required

    Wide-body SOIC16-WB(W) package

    Wide operating temperature range: -40°C to 125°C

    Safety Regulatory Approvals

    VDE 0884-17 Reinforced Isolation
    UL According to UL1577
    IEC 62368-1, IEC 61010-1, IEC 60950-1, GB 4943.1-2011 certifications

  • Applications

    • Industrial automation systems

    • Motor control

    • Medical equipment

    • Test and Measurement

  • Device Information

    PART NUMBER PACKAGE BODY SIZE(NOM)

    CA‐IS3621

    CA‐IS3640

    CA‐IS3641

    CA‐IS3642

    CA‐IS3643

    CA‐IS3644

    		SOIC16-WB(W) 10.30mm×7.66mm

  • Simplified Functional Diagram

    ca-is36xx.png